Q: Why are there several products under the same INCI name, and how do I choose?

A: Several grades under one INCI name is a deliberate choice on our side, for two reasons. First, it protects your formula: the technical details differ between grades, so a finished product is harder to copy once it is on the market. Second, each grade is built for a different system — picking the wrong one shows up as problems with paste body, clarity or heat stability.

Take potassium cocoyl glycinate (KCB series). At the same dosage all of them form a paste, but the body differs:

· KCB-95T: white, on the translucent side — for cleansers where clarity matters
· KCB-95P: softer body — for mildly acidic systems
· KCB-95F: whiter, brighter and firmer — for paste-type products

The right way to choose is not to ask us to pick one for you. Tell us the dosage form, the skin feel you are targeting, the pH range and your cost band; our technical service will shortlist 2–3 candidate grades against 100+ own-developed ingredients and 1000+ formula references, and you confirm with samples.

Q: Amino acid surfactants come as powder, granule, paste and liquid. What is the difference?

A: The four forms are a trade-off between active content and process feasibility, not a ranking of quality:

· Powder: KCB-95T/95F/95P, SCB-95A, SCG-95, SLG-95 — high active content, lower cost per unit, smaller storage and freight volume; usually needs heat to dissolve and disperse, suited to cream and paste cleansers
· Granule: SCG-9508, CMT-90, A85, MS75G — good flow, no dust when charging, suited to plants with clean rooms and automatic weighing
· Paste: MS50 / MD50M, CMT-35, LT40 — balances active content with handling convenience; sulfosuccinate types are mostly paste and are common in mildly acidic formulas
· Liquid: GCK-30 series, GCS series, CMT-30 series — can be cold processed directly, saving heating energy; suited to cleansing mousse, liquid cleanser and shampoo

Suggested order of decision: first whether your line can heat and dissolve, then cost, then skin feel.

Q: What does "salt-free amino acid surfactant" actually mean, and when is it necessary?

A: "Salt-free" means the system contains no chloride, not that it contains no sodium salt. Conventional amino acid surfactant production carries chloride ions into the ingredient, which is unfriendly to two kinds of formula: transparent systems that must stay clear and must not grain over time, and systems that are electrolyte-sensitive or where the customer has an internal limit on chloride.

Grades we offer on this line:

· GCK-30H: chloride-free, solvent-free, preservative-free, easy to thicken, rich and fine foam
· CMT-30K: no salt content, good compatibility, suited to transparent products
· SG-40GR: chloride-free, natural origin, fine and abundant foam

If you are making an ordinary cream cleanser with no special requirement on chloride, there is no need to go out of your way to pick a salt-free grade — it solves a specific problem, it is not simply "better".

Q: Can amino acid and soap-based systems be combined, and how do I decide?

A: Yes, and this is the core idea behind our fifth-generation cleansing technology (amino-acid/soap hybrid, 2017). Pure soap gives abundant foam and a fresh after-feel but tends to leave skin tight; pure amino acid is mild but is not competitive on foam or cost. A hybrid takes the strengths of both.

Ready-made hybrid ingredients mean you do not have to build the blend yourself:

· KCB-65F: potassium cocoyl glycinate + potassium stearate — rich fine foam, easy to thicken and to bring to a paste, preservative-free; for stable amino acid cleansers
· S-A95: palmitoyl glycine + myristic acid + stearic acid + sodium C14-17 sec-alkyl sulfonate — keeps the abundant foam of fatty acid with the conditioning feel of amino acid
· ST-35: sodium cocoyl alaninate + cocamidopropyl hydroxysultaine + sodium lauroamphoacetate + potassium cocoyl hydrolyzed oat protein — a four-component blend

How to trade off: for skin feel look at the fatty acid ratio, for mildness look at the share of amino acid surfactant, for cost look at total active matter. The actual ratio needs a side-by-side sample trial on your target product.

Q: Which ingredients should I look at for a high natural-origin formula?

A: Listed by category, these are the options that can directly replace conventional petrochemical-origin materials (for the exact natural origin index, refer to each product's documentation):

· Primary surfactants: APG0810 (caprylyl/capryl glucoside), APG1214 (coco-glucoside), PO30 series (potassium olivate), SG-40GR (green synthesis, chloride-free)
· Functional surfactants: CR-30H (sodium cocoyl arginate), CRT-30 (sodium cocoyl arginate + sodium lauroyl taurate); the product page states 100% natural origin — please request the product documentation for the calculation basis
· Makeup removal: MP90 (EWG green-rated), RP-80F (EO-free, natural origin, suitable for eye-area use)
· Scrubs: SUGAR-301/311/313 (sucrose), HONDU SS (sea salt), DSS (Dead Sea salt)
· Botanical specialties: LB-20 (Phyllostachys edulis leaf extract, low-temperature extraction with natural spring water, no organic solvent)

One caution: natural origin does not equal mild, and does not automatically mean suitable for sensitive skin. An irritation assessment on the actual system is still required.

Q: What is the "Chinese specialty ingredients" line for, and what can be developed from it?

A: This line uses traceable domestic plant and mineral sources, built around a Chinese-origin story plus functional botanicals. It suits local brand narratives, ingredient-led content, and products that need a differentiated "Chinese ingredient". The 9 current grades group by direction:

· Oil control and moisture: LB-20 Phyllostachys edulis leaf extract (low-temperature spring-water extraction, no organic solvent, contains flavonoids and silicic acid), LC-70 Camellia oleifera seed extract
· Scalp and hair care: CQSEED EX quinoa seed extract, NPP EX bamboo shoot skin extract, POSEED EX Platycladus orientalis seed extract
· Moisture and soothing: CAT100 Citrus aurantium dulcis fruit water (endogenous hydration direction)
· Mineral and cleansing: CANAS Canadian bentonite + sea silt, ML-1 low-molecular spring water (half-width 40–55 Hz, third-party tested)

Scope note: everything above describes the composition and technical characteristics of the ingredient itself. Whether a finished product claims oil control, moisturising or scalp care is a decision the brand owner must make after completing efficacy evaluation and filing under the Cosmetics Supervision and Administration Regulation. We do not make those claims on your behalf.

Q: Thickening and suspending are not working. Which ingredients should I pick?

A: Diagnose the problem first, then choose. We have 9 grades on this line, each mapped to a different situation:

· Hard to thicken amino acid / alkyl phosphate / sodium isethionate systems: HC-10Plus (corn starch + disodium lauryl sulfosuccinate, patented)
· General thickening plus shear resistance and foam stability: HC-1 / HC-1BN (the latter preservative-free)
· Clarity plus suspending (particles, pearl, scrub): SUPGEL 703N (sorbitol + nano-scale bentonite + glycerin)
· Acrylic-type suspending and thickening with good clarity: EA90
· Starch phosphate route, improving paste appearance and spreadability: HP80
· Naturally modified bentonite, combining adsorption with heat resistance: Betone BW (hydrophilic) / BO (lipophilic)
· Thickening together with lower free alkali and lower irritation: soap base plus thickener route — ask technical service for a proposal

The classic wrong pick: using an ordinary thickener in an amino acid system, which gives you "thicker but hazy paste and worse foam".

Q: How do I choose mesh size and material for the scrub range?

A: There are 5 grades, split by material into sucrose, sea salt and Dead Sea salt:

· SUGAR-301: sucrose — 40–60 mesh
· SUGAR-311: sucrose — 60–100 mesh
· SUGAR-313: sucrose (white sugar) — white powder or granule
· HONDU SS: sea salt — white granule
· DSS: Dead Sea salt — white granule

The higher the mesh number, the finer the particle: 40–60 mesh for body scrubs, 60–100 mesh for face and lip. Sucrose grades are biodegradable and suit products with an environmental story; salt grades need extra attention to preservation of the system and moisture protection of the packaging.

Q: The amino acid cleanser will not come to a paste, or crystallises slowly. How to troubleshoot?

A: Work through four points in order; most cases sit in the first two:

1. Wrong grade. The same potassium cocoyl glycinate behaves differently — for a paste, prefer KCB-95F; for a softer body, KCB-95P; for clarity, KCB-95T or GCK-95A (better foam and water solubility, finer and softer texture in the finished product). If the batch is unstable, switch to KCB-65F, which already contains potassium stearate and forms a paste more reliably
2. Not enough solids or wrong ratio. Liquid grades (30% type) have low solids on their own and tend to be soft when used as the main surfactant of a paste; pair them with a solid grade
3. Cooling curve too steep. Crystallisation needs time and a temperature window; rapid chilling tends to give coarse particles or separation
4. pH off target. Paste formation in amino acid surfactants is pH sensitive; grades designed for mildly acidic systems such as KCB-95P are more forgiving

Send us the formula sheet (ratios, pH, charging temperature, cooling rate) and technical service can map it against 1000+ formula references and give specific directions.

Q: Thickening an amino acid system is difficult. What approaches actually work?

A: Three routes, ordered from least to most impact on skin feel:

1. Switch to a grade with built-in thickening: KCB-65F (contains potassium stearate), SG-40GR (chloride-free, easy to thicken), GCK-30H (salt-free, easy to thicken). Smallest change, lowest risk
2. Add a dedicated thickener: HC-10Plus is specified for amino acid, alkyl phosphate and sodium isethionate systems; the HC-1 series is more universal and also improves shear resistance and foam stability
3. Adjust the blend: introduce an amphoteric such as CAB-35 or CHSB-35, which thickens synergistically with anionic surfactants

What we do not recommend is piling in NaCl or a conventional acrylic thickener — amino acid systems are electrolyte sensitive, and you tend to get "thick but hazy, with collapsed foam".

原料索样微信二维码

If you need raw material samples,
you can also add Hondu Enterprise WeChat.