Q: Do you have ready-made formulas we can refer to?

A: Yes — 1000+ formula references covering different systems and dosage forms. But we do not hand over a complete formula that can be produced as-is, for two reasons: a formula has to match your line capability and cost structure, and handing over a finished formula serves neither side well.

What we do instead: a framework, key ratio ranges, points to watch, and optional grade substitutions. You trial it on your own line, and we adjust with you through the process.

Q: When we hit a formula problem, how does technical support respond?

A: Following the five-step SOP:

1. Customer raises the issue — describe the symptom, the formula sheet, process conditions and the failed batch (photos or video help)
2. Project planning — we judge whether it is a routine question or needs to be set up as a project
3. Project development — reproduce the problem in the lab and run control trials
4. Feedback — conclusions and adjustment directions, with adjusted samples where needed
5. Project summary and acceptance — confirm the issue is closed and archive it

Routine technical questions can be answered by your sales or technical contact; systemic difficulties (long-term stability, irritation) are escalated to R&D. In general, the more specific the description, the higher the share resolved in a single reply.

Q: How should incoming material be stored?

A: General requirements (the documentation supplied with each product takes precedence):

· Environment: cool, dry, protected from light; avoid direct sunlight and high temperature (pay particular attention to the top of the racking and window-adjacent positions in summer)
· Sealing: powders should be protected from moisture and caking after opening; liquids should be protected from surface skinning and microbial contamination
· Segregation: store powders and liquids in separate areas so powders do not pick up moisture
· Records: first in, first out by batch, and do not mix batches (this affects traceability of finished product consistency)

The plum rain season in southern China has a marked effect on powder ingredients; we recommend dehumidification in the warehouse together with temperature and humidity logging.

Q: What is the shelf life, and can material be used near the end of it?

A: Shelf life differs by product and pack. Refer to the product label, the COA or the documentation supplied with the goods — we will not put a single number here, because it would mislead.

Two suggestions:

1. Work backwards from your expected consumption cycle when ordering, rather than stockpiling for a price advantage and then having to deal with material near expiry
2. Whether near-expiry material can still be used depends on storage conditions and actual test data, not the date alone. If you need a judgement, send us the batch number and storage records and we can help assess it

Q: What pack sizes are available?

A: By product form: powders and granules are usually fibre drums or cartons with an inner liner bag; liquids are usually plastic drums or IBC totes. The exact specification is set per grade.

For the minimum pack and full-pallet quantity of a specific grade, please confirm with us when ordering — the same grade can be packed differently in different forms, and we would rather not give you a blanket figure that leads you to plan a line around the wrong specification.

Q: Are the products classified as dangerous goods for transport?

A: Our products are cosmetic ingredients and standard grades ship as general cargo, not as dangerous chemicals. However, the MSDS (safety data sheet) for the specific grade is what determines this; classification can differ between grades.

Request the MSDS as needed and state the mode (courier, LTL, sea freight, air freight), because documentation requirements differ by mode. Air freight is the strictest — please allow 3–5 working days.

Q: We cannot use a whole drum at once. How should an opened container be managed?

A: This is where shop-floor management most often breaks down. Four suggestions:

1. Record on opening: date, the person who opened it, remaining quantity — attach it to the container
2. Reseal promptly: transfer powder into a dry, sealed container in one go where possible to limit repeated opening and moisture pick-up; close liquids tightly rather than leaving them open
3. Set an in-house use-by date: define and enforce your own period after opening (for example, use powder within 3 months), which should be stricter than the overall shelf life
4. Do not mix batches: never pour a new batch into an old container, or you lose traceability

If you see caking, off-odour, colour change or separation, stop using it and send us the batch number with photos for assessment rather than charging it to the batch.

原料索样微信二维码

If you need raw material samples,
you can also add Hondu Enterprise WeChat.